(g) Journeyman-wiremen shall provide themselves with the

following tools:

Tool Box - 20" x 8 1/2" x 9 1/2" minimum

2 Pliers, Channel Lock

Pliers, Diagonal Cutters 8"

Pliers, Side Cutters - 9" Offset with Insulated Handles

Pliers, Long Nose 8"

Wrench, Adjustable Crescent 6"

Wrench, Adjustable Crescent 1 0"

Wrench, Pipe - 10"

Wrench, Pipe - 14" or small Chain Tong

Hammer, Straight Claw

Screwdriver - 2 1/2" Blade, 5" Blade, 8" Blade

Wrench, Set Screw, set of eleven Allen

Chisel, Wood 1/4" Cold - 1/2"

Screwdriver, Offset 1/4"

Saw, Hack, Frame and adjustable

Saw,3 Blade, Keyhole, Metal, Wood

Rule, 6' Wood

Punch, Center

Awl

Plumb bob-8 oz.

Square, Combination - 12"

Knife, Wire Skinning, Pocket

Level, 9" Torpedo, Magnetic

Tester, Knopp with pouch or equal

Tap Wrench, up to 1/4 - 20

Steel Tape 50'

Steel Tape 12' minimum, 25' maximum

Chalk Line

Airplane Shears - 10"

Flashlight

2 Phillips Screwdrivers, Size 1 and 2

Spin Tite Wrench Set - 1/4",5/16", 7/16"

5" Leather Pocket Pouch

Protractor Level

Screwholder insulated

Wirestripper

_____________________________________________________________________________

Sound and Communications Tool List:

1. Punch Tool w/110 & 66 Blades
2. Coax Crimp Tool (RG-59, 62 & 6)
3. Cat 5 Strippers
4. Wire Strippers (Miller type)
5. Utility Knife
6. Wire Cutters
7. T&B Sta-Kon tool
8. Lineman Pliers
9. Channel Locks (2 pairs)
10. Flat-Head Screwdrivers (Assorted sizes)
11. Phillips-Head Screwdrivers (Assorted sizes)
12. Sheetrock saw (hand type)
13. Nutdrivers (1/4” through 7/16”)
14. Hacksaw
15. Hammer
16. Tool pouch
17. Volt-Ohm Meter
18. Tool Box (20” x 81/2” x 9” minimum with lock)
19. Scissors
20. Awl
21. Flashlight
22. Tone Generator
23. Probe
24. Tape Measure
25. Adjustable Wrench
26. Needle Nose Pliers
27. Torpedo Level 8”